Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA

Xiong Li

doi:doi:10.11648/j.sd.20180603.18

| Peer-Reviewed

Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA

Xiong Li

Published in Science Discovery (Volume 6, Issue 3)

Received: 26 June 2018 Published: 26 June 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this paper, we research and develop a new type of optical fiber based on high-speed switching FPGA routing automatic protection switching device, its innovative USES high-speed electronic SWITCH high-speed exchange of FPGA design, will be 0 to 10g digital optical signal photoelectric conversion amplification and rearrangement of the equipment selected by the high speed switching FPGA SWITCH protection, can for any important 0 to 10 g optical signal circuit after transformation (1 + 1) send after protect rearrangement of amplification, adopt concurrent optimization of transmission mode, automatic selection of high quality circuit signal in the microsecond time complete electrical SWITCH (far superior to the traditional common optical SWITCH SWITCH time), based on the development of commercial products for the national grid ehv transmission network users with high reliability,high performance of 0 to 10 g optical signal transmission channel protection, its there is no insertion loss, does not affect the original light path, also used in long-distance optical network transmission protection system in the west and subvert the traditional light path switching apparatus for at least 2 ~ 5 DBM large insertion loss. It overcomes the disadvantage of the traditional optical switch protection device.

Published in	Science Discovery (Volume 6, Issue 3)
DOI	10.11648/j.sd.20180603.18
Page(s)	189-192
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

High-Speed Exchange, FPGA, OPTICAL SWITCH, 3R Regeneration, Digital Signal OPTICAL Path Switching, Insertion Loss

References

[1]	谷昕;利用光纤通信网络传送继电保护信号[J];电力系统通信;2014年07期。
[2]	吴湛;光路自动切换保护技术的原理和应用设想[J];电力系统通信;2016年02期。
[3]	丁慧霞;陈希;;光纤通道传输继电保护信号误码性能研究[J];电力系统通信;2008年02期。
[4]	朱彬浅谈光纤通信系统监测[J];电子商务;2011年12期。
[5]	李志东;ECM-FOMS光缆自动监测和管理系统原理[J];广东输电与变电技术;2007年04期。
[6]	王玺;光传输网络保护倒换[J];硅谷;2012年06期。
[7]	江明珠;徐庆富;李长俊;1:1方式带备纤监控的光路检测系统研制[J];光通信技术;2011年01期。
[8]	全光3R再生系统理论分析和实验研究2017王耀天-《天津大学学报》。
[9]	具有3r放大功能的光保护切换单元2013年专利作者张引强，卓文合，潘子春，陈是同，李雄。
[10]	用于光线路保护系统的带osc放大的edfa装置安运志2015。
[11]	An all-optical 3R regenerator for 40-Gbit/s system based onsignal-pump fiber optical parametric amplification 基于信号抽运的光纤光参量放大的全光3R再生系统 Wang Ju 物理学报2017。
[12]	一种具有光放大功能的滤波器设计梁瑞生半导体光电2016。

Cite This Article

Plain Text BibTeX RIS

APA Style

Xiong Li. (2018). Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA. Science Discovery, 6(3), 189-192. https://doi.org/10.11648/j.sd.20180603.18

Copy | Download

ACS Style

Xiong Li. Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA. Sci. Discov. 2018, 6(3), 189-192. doi: 10.11648/j.sd.20180603.18

Copy | Download

AMA Style

Xiong Li. Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA. Sci Discov. 2018;6(3):189-192. doi: 10.11648/j.sd.20180603.18

Copy | Download

@article{10.11648/j.sd.20180603.18,
  author = {Xiong Li},
  title = {Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA},
  journal = {Science Discovery},
  volume = {6},
  number = {3},
  pages = {189-192},
  doi = {10.11648/j.sd.20180603.18},
  url = {https://doi.org/10.11648/j.sd.20180603.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180603.18},
  abstract = {In this paper, we research and develop a new type of optical fiber based on high-speed switching FPGA routing automatic protection switching device, its innovative USES high-speed electronic SWITCH high-speed exchange of FPGA design, will be 0 to 10g digital optical signal photoelectric conversion amplification and rearrangement of the equipment selected by the high speed switching FPGA SWITCH protection, can for any important 0 to 10 g optical signal circuit after transformation (1 + 1) send after protect rearrangement of amplification, adopt concurrent optimization of transmission mode, automatic selection of high quality circuit signal in the microsecond time complete electrical SWITCH (far superior to the traditional common optical SWITCH SWITCH time), based on the development of commercial products for the national grid ehv transmission network users with high reliability,high performance of 0 to 10 g optical signal transmission channel protection, its there is no insertion loss, does not affect the original light path, also used in long-distance optical network transmission protection system in the west and subvert the traditional light path switching apparatus for at least 2 ~ 5 DBM large insertion loss. It overcomes the disadvantage of the traditional optical switch protection device.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA
AU  - Xiong Li
Y1  - 2018/06/26
PY  - 2018
N1  - https://doi.org/10.11648/j.sd.20180603.18
DO  - 10.11648/j.sd.20180603.18
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 189
EP  - 192
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20180603.18
AB  - In this paper, we research and develop a new type of optical fiber based on high-speed switching FPGA routing automatic protection switching device, its innovative USES high-speed electronic SWITCH high-speed exchange of FPGA design, will be 0 to 10g digital optical signal photoelectric conversion amplification and rearrangement of the equipment selected by the high speed switching FPGA SWITCH protection, can for any important 0 to 10 g optical signal circuit after transformation (1 + 1) send after protect rearrangement of amplification, adopt concurrent optimization of transmission mode, automatic selection of high quality circuit signal in the microsecond time complete electrical SWITCH (far superior to the traditional common optical SWITCH SWITCH time), based on the development of commercial products for the national grid ehv transmission network users with high reliability,high performance of 0 to 10 g optical signal transmission channel protection, its there is no insertion loss, does not affect the original light path, also used in long-distance optical network transmission protection system in the west and subvert the traditional light path switching apparatus for at least 2 ~ 5 DBM large insertion loss. It overcomes the disadvantage of the traditional optical switch protection device.
VL  - 6
IS  - 3
ER  -

Copy | Download

Author Information

Xiong Li

Department of Network Engineering, Shanghai Qianqiao University,

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Xiong Li. (2018). Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA. Science Discovery, 6(3), 189-192. https://doi.org/10.11648/j.sd.20180603.18

Copy | Download

ACS Style

Xiong Li. Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA. Sci. Discov. 2018, 6(3), 189-192. doi: 10.11648/j.sd.20180603.18

Copy | Download

AMA Style

Xiong Li. Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA. Sci Discov. 2018;6(3):189-192. doi: 10.11648/j.sd.20180603.18

Copy | Download

@article{10.11648/j.sd.20180603.18,
  author = {Xiong Li},
  title = {Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA},
  journal = {Science Discovery},
  volume = {6},
  number = {3},
  pages = {189-192},
  doi = {10.11648/j.sd.20180603.18},
  url = {https://doi.org/10.11648/j.sd.20180603.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180603.18},
  abstract = {In this paper, we research and develop a new type of optical fiber based on high-speed switching FPGA routing automatic protection switching device, its innovative USES high-speed electronic SWITCH high-speed exchange of FPGA design, will be 0 to 10g digital optical signal photoelectric conversion amplification and rearrangement of the equipment selected by the high speed switching FPGA SWITCH protection, can for any important 0 to 10 g optical signal circuit after transformation (1 + 1) send after protect rearrangement of amplification, adopt concurrent optimization of transmission mode, automatic selection of high quality circuit signal in the microsecond time complete electrical SWITCH (far superior to the traditional common optical SWITCH SWITCH time), based on the development of commercial products for the national grid ehv transmission network users with high reliability,high performance of 0 to 10 g optical signal transmission channel protection, its there is no insertion loss, does not affect the original light path, also used in long-distance optical network transmission protection system in the west and subvert the traditional light path switching apparatus for at least 2 ~ 5 DBM large insertion loss. It overcomes the disadvantage of the traditional optical switch protection device.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Study on Automatic Switching Protection of Optical with 3R Amplier Based on FPGA
AU  - Xiong Li
Y1  - 2018/06/26
PY  - 2018
N1  - https://doi.org/10.11648/j.sd.20180603.18
DO  - 10.11648/j.sd.20180603.18
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 189
EP  - 192
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20180603.18
AB  - In this paper, we research and develop a new type of optical fiber based on high-speed switching FPGA routing automatic protection switching device, its innovative USES high-speed electronic SWITCH high-speed exchange of FPGA design, will be 0 to 10g digital optical signal photoelectric conversion amplification and rearrangement of the equipment selected by the high speed switching FPGA SWITCH protection, can for any important 0 to 10 g optical signal circuit after transformation (1 + 1) send after protect rearrangement of amplification, adopt concurrent optimization of transmission mode, automatic selection of high quality circuit signal in the microsecond time complete electrical SWITCH (far superior to the traditional common optical SWITCH SWITCH time), based on the development of commercial products for the national grid ehv transmission network users with high reliability,high performance of 0 to 10 g optical signal transmission channel protection, its there is no insertion loss, does not affect the original light path, also used in long-distance optical network transmission protection system in the west and subvert the traditional light path switching apparatus for at least 2 ~ 5 DBM large insertion loss. It overcomes the disadvantage of the traditional optical switch protection device.
VL  - 6
IS  - 3
ER  -

Copy | Download