Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box

Song Leiming; Zhang Jiayu; Chen Hao

doi:doi:10.11648/j.sd.20180602.12

| Peer-Reviewed

Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box

Song Leiming, Zhang Jiayu, Chen Hao

Published in Science Discovery (Volume 6, Issue 2)

Received: 20 June 2018 Published: 22 June 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Through the test method of bench test, the vibration and noise condition of vehicle vacuum circuit breaker equipment box is analyzed under several measures for vibration and noise reduction, which provides important basis for vibration and noise reduction and low noise design of this device. The experimental results show that the damping effect is not obvious when adding the damping washer between the installation panel of main circuit breaker and the installation box girder. Adding vibration isolation sponge and rubber shock absorber on the contact surface between the platform and the box has a certain effect on alleviating the vibration of the bench and reducing the noise at the bottom of the box, and the effect of vibration and noise reduction from shock absorber is better compared with the vibration isolation sponge.

Published in	Science Discovery (Volume 6, Issue 2)
DOI	10.11648/j.sd.20180602.12
Page(s)	85-92
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Vehicular Vacuum Circuit Breaker, High Pressure Equipment Box, Vibration and Noise Reduction

References

[1]	丁勇.高速动车组车体操作过电压特性仿真分析与试验验证[J].中国铁路,2017(09):68-72+78。
[2]	莫坚.SS_9改进型机车受电弓及主断路器控制电路的改进设计[J].机车电传动,2007(03):71-73。
[3]	史丹.动车组高压系统操作过电压及其抑制技术研究[D].北京:北京交通大学,2015:3。
[4]	冉旺.基于电流信息的列车不断电过分相技术研究[D].北京:北京交通大学,2014:4。
[5]	李富军,韩建新.高压真空断路器的应用技术探究[J].中国高新技术企业,2016(34):71-72。
[6]	汪洋.电力系统中高压真空断路器常见故障原因分析及处理[J].内燃机与配件,2017(08):105-106。
[7]	孔祝英,李执希.电力机车新型智能真空主断路器的研制[J].机车电传动,2010(05):54-56+69。
[8]	马世骁,林莘,王钰等.高压断路器寿命可靠性判断法[J].辽宁工程技术大学学报,2006,25(S2):170-172。
[9]	刘光娜,唐风梅.动车组车载真空断路器检修易擦伤问题分析及工艺改进[J].科技视界,2015(10):78+222。
[10]	欧阳乐成,吴广宁,李天鸷等.频繁开断下车载真空断路器寿命试验方法的讨论[J].高压电器,2012,48(9):83-87+91。
[11]	李天鸷,吴广宁,欧阳乐成等.高速列车过分相段下真空断路器的电寿命研究[J].机车电传动,2012(04):26-29。
[12]	韩伟,廖乡萍,刘冰.动车组主断路器反馈信号故障原因分析及应对措施[J].电力机车与城轨车辆,2017,40(04):81-83。
[13]	赵良省.噪声与振动控制技术[M].北京:化学工业出版社,2005:11-13。
[14]	马森月.高速铁路噪声源识别—津秦铁路客专试验研究[D].北京;北京交通大学,2014:5。
[15]	谭迈之.机车真空主断路器试验台的研制[J].电力机车与城轨车辆,2015,38(05):65-69。

Cite This Article

Plain Text BibTeX RIS

APA Style

Song Leiming, Zhang Jiayu, Chen Hao. (2018). Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box. Science Discovery, 6(2), 85-92. https://doi.org/10.11648/j.sd.20180602.12

Copy | Download

ACS Style

Song Leiming; Zhang Jiayu; Chen Hao. Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box. Sci. Discov. 2018, 6(2), 85-92. doi: 10.11648/j.sd.20180602.12

Copy | Download

AMA Style

Song Leiming, Zhang Jiayu, Chen Hao. Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box. Sci Discov. 2018;6(2):85-92. doi: 10.11648/j.sd.20180602.12

Copy | Download

@article{10.11648/j.sd.20180602.12,
  author = {Song Leiming and Zhang Jiayu and Chen Hao},
  title = {Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box},
  journal = {Science Discovery},
  volume = {6},
  number = {2},
  pages = {85-92},
  doi = {10.11648/j.sd.20180602.12},
  url = {https://doi.org/10.11648/j.sd.20180602.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180602.12},
  abstract = {Through the test method of bench test, the vibration and noise condition of vehicle vacuum circuit breaker equipment box is analyzed under several measures for vibration and noise reduction, which provides important basis for vibration and noise reduction and low noise design of this device. The experimental results show that the damping effect is not obvious when adding the damping washer between the installation panel of main circuit breaker and the installation box girder. Adding vibration isolation sponge and rubber shock absorber on the contact surface between the platform and the box has a certain effect on alleviating the vibration of the bench and reducing the noise at the bottom of the box, and the effect of vibration and noise reduction from shock absorber is better compared with the vibration isolation sponge.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box
AU  - Song Leiming
AU  - Zhang Jiayu
AU  - Chen Hao
Y1  - 2018/06/22
PY  - 2018
N1  - https://doi.org/10.11648/j.sd.20180602.12
DO  - 10.11648/j.sd.20180602.12
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 85
EP  - 92
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20180602.12
AB  - Through the test method of bench test, the vibration and noise condition of vehicle vacuum circuit breaker equipment box is analyzed under several measures for vibration and noise reduction, which provides important basis for vibration and noise reduction and low noise design of this device. The experimental results show that the damping effect is not obvious when adding the damping washer between the installation panel of main circuit breaker and the installation box girder. Adding vibration isolation sponge and rubber shock absorber on the contact surface between the platform and the box has a certain effect on alleviating the vibration of the bench and reducing the noise at the bottom of the box, and the effect of vibration and noise reduction from shock absorber is better compared with the vibration isolation sponge.
VL  - 6
IS  - 2
ER  -

Copy | Download

Author Information

Song Leiming

School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing, China
Zhang Jiayu

School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing, China
Chen Hao

School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Song Leiming, Zhang Jiayu, Chen Hao. (2018). Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box. Science Discovery, 6(2), 85-92. https://doi.org/10.11648/j.sd.20180602.12

Copy | Download

ACS Style

Song Leiming; Zhang Jiayu; Chen Hao. Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box. Sci. Discov. 2018, 6(2), 85-92. doi: 10.11648/j.sd.20180602.12

Copy | Download

AMA Style

Song Leiming, Zhang Jiayu, Chen Hao. Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box. Sci Discov. 2018;6(2):85-92. doi: 10.11648/j.sd.20180602.12

Copy | Download

@article{10.11648/j.sd.20180602.12,
  author = {Song Leiming and Zhang Jiayu and Chen Hao},
  title = {Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box},
  journal = {Science Discovery},
  volume = {6},
  number = {2},
  pages = {85-92},
  doi = {10.11648/j.sd.20180602.12},
  url = {https://doi.org/10.11648/j.sd.20180602.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20180602.12},
  abstract = {Through the test method of bench test, the vibration and noise condition of vehicle vacuum circuit breaker equipment box is analyzed under several measures for vibration and noise reduction, which provides important basis for vibration and noise reduction and low noise design of this device. The experimental results show that the damping effect is not obvious when adding the damping washer between the installation panel of main circuit breaker and the installation box girder. Adding vibration isolation sponge and rubber shock absorber on the contact surface between the platform and the box has a certain effect on alleviating the vibration of the bench and reducing the noise at the bottom of the box, and the effect of vibration and noise reduction from shock absorber is better compared with the vibration isolation sponge.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Experimental Research on Vibration and Noise Reduction of Vehicular Vacuum Circuit Breaker's Equipment Box
AU  - Song Leiming
AU  - Zhang Jiayu
AU  - Chen Hao
Y1  - 2018/06/22
PY  - 2018
N1  - https://doi.org/10.11648/j.sd.20180602.12
DO  - 10.11648/j.sd.20180602.12
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 85
EP  - 92
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20180602.12
AB  - Through the test method of bench test, the vibration and noise condition of vehicle vacuum circuit breaker equipment box is analyzed under several measures for vibration and noise reduction, which provides important basis for vibration and noise reduction and low noise design of this device. The experimental results show that the damping effect is not obvious when adding the damping washer between the installation panel of main circuit breaker and the installation box girder. Adding vibration isolation sponge and rubber shock absorber on the contact surface between the platform and the box has a certain effect on alleviating the vibration of the bench and reducing the noise at the bottom of the box, and the effect of vibration and noise reduction from shock absorber is better compared with the vibration isolation sponge.
VL  - 6
IS  - 2
ER  -

Copy | Download