A Method of Determining the Recombination Centre Level in High-Speed Power Devices

Yong Taek Pak; Nam Chol Yu; KyongIl Chu; Kum Jun Ryang

doi:doi:10.11648/j.jeee.20221003.13

| Peer-Reviewed

A Method of Determining the Recombination Centre Level in High-Speed Power Devices

Yong Taek Pak, Nam Chol Yu, KyongIl Chu, Kum Jun Ryang

Published in Journal of Electrical and Electronic Engineering (Volume 10, Issue 3)

Received: 23 March 2022 Accepted: 10 May 2022 Published: 8 June 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Rational adjusting 3 main parameters of fast p⁺nn⁺ structure such as the forward voltage drop, reverse recovery time and reverse current means to control rationally the carrier lifetime of high and low level and the space-charge generation carrier lifetime. In other words, we should make the lifetime of the high-level carrier and the space charge generation carrier as long as possible but the low-level carrier lifetime as short as possible. The best way to satisfying these relations is forming the optimal recombination center level. In this paper, we analyze of optimal recombination center level to adjust rationally the 3 main parameters of fast p⁺nn⁺ structure - forward voltage drop, reverse recovery time and reverse current. Forward voltage drop of p⁺nn⁺ structure is affected strongly by the high-level carrier lifetime. Reverse current is affected strongly by the low-level lifetime and reverse recovery time is affected strongly by the space-charge generation lifetime. These 3 carrier lifetimes influence 3 main parameters of p⁺nn⁺ structure differently. When we decrease the low-level carrier lifetime in order to decrease the reverse recovery time, the forward voltage drop increases and when we increase the high-level carrier lifetime for reducing the forward voltage drop, the reverse recovery time increases. So, in order to adjust these conflicting relations, we will illuminate about the recombination center level formed in the basic floor of p⁺nn⁺ structure. On the other hand, to determine the recombination center level coincide with practical recombination center level, we suggest the analytic method of determination the recombination center level formed by 2 carrier lifetime regulation sources.

Published in	Journal of Electrical and Electronic Engineering (Volume 10, Issue 3)
DOI	10.11648/j.jeee.20221003.13
Page(s)	86-94
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Optimal Recombination Center Level, p⁺nn⁺ Structure, 3 Main Parameters, Analysis

References

[1]	I. Dudeck, and R. Kassing, Gold as an optimal recombination center for power rectifiers and thyristors, Solid State Electronics, 20 (1997), 1033-1036.
[2]	B. J. Baliga, S. Krishna, Optimization of recombination levels and their capture cross-sections in power rectifiers and thyristors, Solid State Electronics, 20 (1998), 225-232.
[3]	B. J. Baliga, E. Sun, Comparision of gold, platinum, and electron irradidation for controlling lifetime in power rectifiers, IEEE Transactions on Electron Devices, Vol. ED-24 (2009), 6, 685-688.
[4]	V. Benda, Using Carrier Lifetime Dependences On Temperature And Current Concentration in Diagnostics of Silicon Structures, EPE Firenze (2003), 65-68.
[5]	N. Eshaghi Gorji, et al., Transition and recombination rates in intermediate band solar cells, Scientia Iranica D19 (3) (2012), 806-811, doi: 10.1016/j.scient.2012.02.005.
[6]	OLOF ENGSTFoM and ANDERS ALU, THERMODYNAMICAL ANALYSIS OF OPTIMAL RECOMBINATION CENTERS IN THYRISTORS. Solid-State Eectronics, Vol. 21. (1978). 1571-1576, doi: 10.1016/0038-1101(78)90243-5.
[7]	Wensuo Chen, et al., A novel Schottky contact super barrier rectifier with a top N-enhancement layer and a P-injector, Journal of Computational Electronics (2018) 17: 707–712, doi: 10.1007/s10825-018-1128-6.
[8]	Zutao Zhang, et al., Design, modelling and practical tests on a high-voltage kinetic energy harvesting (EH) system for a renewable road tunnel based on linear alternators, Applied Energy 164 (2016) 152–161, doi: 10.1016/j.apenergy.2015.11.096.
[9]	JIANCHENG YANG, et al., Dynamic Switching Characteristics of 1 A Forward Current β-Ga₂O₃ Rectifiers, Journal of electron devices society, doi: 10.1109/JEDS.2018.2877495.
[10]	Arul Allwyn Clarence Asis & Samuel Edward Rajan, Efficiency Evaluation of a MOSFET bridge rectifier for Powering LEDs using Piezo-electric Energy Harvesting Systems, Automatika, 57: 2, (2016) 329-336, DOI: 10.7305/automatika.2016.10.959.
[11]	Yijun Shi, et al., Investigation on the device geometry-dependent reverse recovery characteristic of AlGaN/GaN lateral field-effect rectifier (L-FER), Superlattices and Microstructures 120 (2018) 605–610, doi:/10.1016/j.spmi.2018.06.020.
[12]	Ying Wang, et al., Low-leakage 4H-SiC junction barrier Schottky rectifier with sandwich P-type well, IET Power Electron., 2015, Vol. 8, Iss. 5, pp. 672–677, doi: 10.1049/iet-pel.2014.0332.
[13]	Hongfei Wu, et al., A Family of Soft-Switching DC–DC Converters Based on a Phase-Shift-Controlled Active Boost Rectifier, IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 30, NO. 2, FEBRUARY 2015 657, DOI: 10.1109/TPEL.2014.2308278.
[14]	S. Wonsak, et al., Nuclear Instruments & Methods in Physics Research A (2015), doi: 10.1016/j. nima.2015.04.027i.
[15]	Fei Jia, et al., Mechanisms of reverse current and mitigation strategies in proton exchange membrane fuel cells during startups International journal of hydrogen energy, 41 (2016) 6469-6475, doi.: 10.1016/j.ijhydene.2016.03.037.
[16]	Apurba Chakraborty, et al., Reverse Bias Leakage Current Mechanism of AlGaN/InGaN/GaN Heterostructure, Electron. Mater. Lett., Vol. 12, No. 2 (2016), pp. 232-236, DOI: 10.1007/s13391-015-5249-9.
[17]	Yifei Luo, et al., A Voltage Model of p-i-n Diodes at Reverse Recovery Under Short-Time Freewheeling, IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 32, NO. 1, JANUARY 2017, doi: 10.1109/TPEL.2016.2535664.
[18]	Stanislav Banáša, et al., Accurate diode behavioral model with reverse recovery, Solid State Electronics 139 (2018) 31–38, doi: 10.1016/j.sse.2017.10.034.
[19]	Zhaohui Wang, et al., Evaluation of reverse recovery characteristic of silicon carbide metal–oxide–semiconductor field-effect transistor intrinsic diode, IET Power Electron., 2016, Vol. 9, Iss. 5, pp. 969–976, doi: 10.1049/iet-pel.2014.0965.
[20]	Haoze Luo, et al., Online High-Power p-i-n Diode Junction Temperature Extraction With Reverse Recovery Fall Storage Charge, IEEE TRANS. POWER ELECTRONICS, Vol. 32, No. 4 (2017) 2558-2568, doi: 10.1109/TPEL.2016.2580618.
[21]	Xin Tong, et al., SJ-MOSFET with wave-type field limiting ring for high di/dt robustness of body diode reverse recovery, Solid State Electronics 148 (2018) 70–74, doi: 10.1016/j.sse.2018.07.007.
[22]	Chen, Min & Lutz, J. & Felsl, H. P. & Schulze, H.-J. Analysis of a p+p-n-n+ diode structure. Proceedings of the International Symposium on Power Semiconductor Devices and ICs. (2008) 153 - 156. doi: 10.1109/ISPSD.2008.4538921.
[23]	Min Chen; Josef Lutz; Hans-Peter Felsl; Hans-Joachim Schulze, Analysis of a p+p-n-n+ diode structure, 2008 20th International Symposium on Power Semiconductor Devices and IC's, doi: 10.1109/ISPSD.2008.4538921.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yong Taek Pak, Nam Chol Yu, KyongIl Chu, Kum Jun Ryang. (2022). A Method of Determining the Recombination Centre Level in High-Speed Power Devices. Journal of Electrical and Electronic Engineering, 10(3), 86-94. https://doi.org/10.11648/j.jeee.20221003.13

Copy | Download

ACS Style

Yong Taek Pak; Nam Chol Yu; KyongIl Chu; Kum Jun Ryang. A Method of Determining the Recombination Centre Level in High-Speed Power Devices. J. Electr. Electron. Eng. 2022, 10(3), 86-94. doi: 10.11648/j.jeee.20221003.13

Copy | Download

AMA Style

Yong Taek Pak, Nam Chol Yu, KyongIl Chu, Kum Jun Ryang. A Method of Determining the Recombination Centre Level in High-Speed Power Devices. J Electr Electron Eng. 2022;10(3):86-94. doi: 10.11648/j.jeee.20221003.13

Copy | Download

@article{10.11648/j.jeee.20221003.13,
  author = {Yong Taek Pak and Nam Chol Yu and KyongIl Chu and Kum Jun Ryang},
  title = {A Method of Determining the Recombination Centre Level in High-Speed Power Devices},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {10},
  number = {3},
  pages = {86-94},
  doi = {10.11648/j.jeee.20221003.13},
  url = {https://doi.org/10.11648/j.jeee.20221003.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20221003.13},
  abstract = {Rational adjusting 3 main parameters of fast p+nn+ structure such as the forward voltage drop, reverse recovery time and reverse current means to control rationally the carrier lifetime of high and low level and the space-charge generation carrier lifetime. In other words, we should make the lifetime of the high-level carrier and the space charge generation carrier as long as possible but the low-level carrier lifetime as short as possible. The best way to satisfying these relations is forming the optimal recombination center level. In this paper, we analyze of optimal recombination center level to adjust rationally the 3 main parameters of fast p+nn+ structure - forward voltage drop, reverse recovery time and reverse current. Forward voltage drop of p+nn+ structure is affected strongly by the high-level carrier lifetime. Reverse current is affected strongly by the low-level lifetime and reverse recovery time is affected strongly by the space-charge generation lifetime. These 3 carrier lifetimes influence 3 main parameters of p+nn+ structure differently. When we decrease the low-level carrier lifetime in order to decrease the reverse recovery time, the forward voltage drop increases and when we increase the high-level carrier lifetime for reducing the forward voltage drop, the reverse recovery time increases. So, in order to adjust these conflicting relations, we will illuminate about the recombination center level formed in the basic floor of p+nn+ structure. On the other hand, to determine the recombination center level coincide with practical recombination center level, we suggest the analytic method of determination the recombination center level formed by 2 carrier lifetime regulation sources.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - A Method of Determining the Recombination Centre Level in High-Speed Power Devices
AU  - Yong Taek Pak
AU  - Nam Chol Yu
AU  - KyongIl Chu
AU  - Kum Jun Ryang
Y1  - 2022/06/08
PY  - 2022
N1  - https://doi.org/10.11648/j.jeee.20221003.13
DO  - 10.11648/j.jeee.20221003.13
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 86
EP  - 94
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20221003.13
AB  - Rational adjusting 3 main parameters of fast p+nn+ structure such as the forward voltage drop, reverse recovery time and reverse current means to control rationally the carrier lifetime of high and low level and the space-charge generation carrier lifetime. In other words, we should make the lifetime of the high-level carrier and the space charge generation carrier as long as possible but the low-level carrier lifetime as short as possible. The best way to satisfying these relations is forming the optimal recombination center level. In this paper, we analyze of optimal recombination center level to adjust rationally the 3 main parameters of fast p+nn+ structure - forward voltage drop, reverse recovery time and reverse current. Forward voltage drop of p+nn+ structure is affected strongly by the high-level carrier lifetime. Reverse current is affected strongly by the low-level lifetime and reverse recovery time is affected strongly by the space-charge generation lifetime. These 3 carrier lifetimes influence 3 main parameters of p+nn+ structure differently. When we decrease the low-level carrier lifetime in order to decrease the reverse recovery time, the forward voltage drop increases and when we increase the high-level carrier lifetime for reducing the forward voltage drop, the reverse recovery time increases. So, in order to adjust these conflicting relations, we will illuminate about the recombination center level formed in the basic floor of p+nn+ structure. On the other hand, to determine the recombination center level coincide with practical recombination center level, we suggest the analytic method of determination the recombination center level formed by 2 carrier lifetime regulation sources.
VL  - 10
IS  - 3
ER  -

Copy | Download

Author Information

Yong Taek Pak

Institute of Semiconductor, Kim Chaek University of Technology, Pyongyang, Democratic People’s Republic of Korea
Nam Chol Yu

School of Science and Engineering, Kim Chaek University of Technology, Pyongyang, Democratic People’s Republic of Korea
KyongIl Chu

Faculty of Physics, Kim Jong Tae Haeju University of Education, Haeju, Democratic People’s Republic of Korea
Kum Jun Ryang

Faculty of Physics, Kim Jong Tae Haeju University of Education, Haeju, Democratic People’s Republic of Korea

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yong Taek Pak, Nam Chol Yu, KyongIl Chu, Kum Jun Ryang. (2022). A Method of Determining the Recombination Centre Level in High-Speed Power Devices. Journal of Electrical and Electronic Engineering, 10(3), 86-94. https://doi.org/10.11648/j.jeee.20221003.13

Copy | Download

ACS Style

Yong Taek Pak; Nam Chol Yu; KyongIl Chu; Kum Jun Ryang. A Method of Determining the Recombination Centre Level in High-Speed Power Devices. J. Electr. Electron. Eng. 2022, 10(3), 86-94. doi: 10.11648/j.jeee.20221003.13

Copy | Download

AMA Style

Yong Taek Pak, Nam Chol Yu, KyongIl Chu, Kum Jun Ryang. A Method of Determining the Recombination Centre Level in High-Speed Power Devices. J Electr Electron Eng. 2022;10(3):86-94. doi: 10.11648/j.jeee.20221003.13

Copy | Download

@article{10.11648/j.jeee.20221003.13,
  author = {Yong Taek Pak and Nam Chol Yu and KyongIl Chu and Kum Jun Ryang},
  title = {A Method of Determining the Recombination Centre Level in High-Speed Power Devices},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {10},
  number = {3},
  pages = {86-94},
  doi = {10.11648/j.jeee.20221003.13},
  url = {https://doi.org/10.11648/j.jeee.20221003.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20221003.13},
  abstract = {Rational adjusting 3 main parameters of fast p+nn+ structure such as the forward voltage drop, reverse recovery time and reverse current means to control rationally the carrier lifetime of high and low level and the space-charge generation carrier lifetime. In other words, we should make the lifetime of the high-level carrier and the space charge generation carrier as long as possible but the low-level carrier lifetime as short as possible. The best way to satisfying these relations is forming the optimal recombination center level. In this paper, we analyze of optimal recombination center level to adjust rationally the 3 main parameters of fast p+nn+ structure - forward voltage drop, reverse recovery time and reverse current. Forward voltage drop of p+nn+ structure is affected strongly by the high-level carrier lifetime. Reverse current is affected strongly by the low-level lifetime and reverse recovery time is affected strongly by the space-charge generation lifetime. These 3 carrier lifetimes influence 3 main parameters of p+nn+ structure differently. When we decrease the low-level carrier lifetime in order to decrease the reverse recovery time, the forward voltage drop increases and when we increase the high-level carrier lifetime for reducing the forward voltage drop, the reverse recovery time increases. So, in order to adjust these conflicting relations, we will illuminate about the recombination center level formed in the basic floor of p+nn+ structure. On the other hand, to determine the recombination center level coincide with practical recombination center level, we suggest the analytic method of determination the recombination center level formed by 2 carrier lifetime regulation sources.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - A Method of Determining the Recombination Centre Level in High-Speed Power Devices
AU  - Yong Taek Pak
AU  - Nam Chol Yu
AU  - KyongIl Chu
AU  - Kum Jun Ryang
Y1  - 2022/06/08
PY  - 2022
N1  - https://doi.org/10.11648/j.jeee.20221003.13
DO  - 10.11648/j.jeee.20221003.13
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 86
EP  - 94
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20221003.13
AB  - Rational adjusting 3 main parameters of fast p+nn+ structure such as the forward voltage drop, reverse recovery time and reverse current means to control rationally the carrier lifetime of high and low level and the space-charge generation carrier lifetime. In other words, we should make the lifetime of the high-level carrier and the space charge generation carrier as long as possible but the low-level carrier lifetime as short as possible. The best way to satisfying these relations is forming the optimal recombination center level. In this paper, we analyze of optimal recombination center level to adjust rationally the 3 main parameters of fast p+nn+ structure - forward voltage drop, reverse recovery time and reverse current. Forward voltage drop of p+nn+ structure is affected strongly by the high-level carrier lifetime. Reverse current is affected strongly by the low-level lifetime and reverse recovery time is affected strongly by the space-charge generation lifetime. These 3 carrier lifetimes influence 3 main parameters of p+nn+ structure differently. When we decrease the low-level carrier lifetime in order to decrease the reverse recovery time, the forward voltage drop increases and when we increase the high-level carrier lifetime for reducing the forward voltage drop, the reverse recovery time increases. So, in order to adjust these conflicting relations, we will illuminate about the recombination center level formed in the basic floor of p+nn+ structure. On the other hand, to determine the recombination center level coincide with practical recombination center level, we suggest the analytic method of determination the recombination center level formed by 2 carrier lifetime regulation sources.
VL  - 10
IS  - 3
ER  -

Copy | Download