Recently great interest has been aroused by the development of photonic crystal fibers (PCFs). Hollow-core photonic crystal fibers (HC-PCFs) can guide light inside the hollow core by photonic bandgap or inhibited-coupling mechanisms. HC-PCFs exhibit low propagation losses at 1.064 μm and the 1.51-1.60 μm range. The HC-PCFs are now implemented as an important tool of laser beam delivery in place of traditional single mode optical fibers. One of the problems arising from high-power injection in the optical fiber is the probability of triggering the fiber fuse effect. This effect is related to a heat conduction process in optical fibers. The unsteady-state thermal conduction process in several HC-PCFs (revolver fibers) for high-power transmission was studied theoretically by the explicit finite-difference method using the thermochemical SiOx production model. For heat conduction analysis, the complicated inner structure of revolver fiber was simplified using the model composed of silica-ring and air-hole layers. The calculated velocities of fiber fuse propagation in two types of polymer-coated revolver fibers were in fair agreement with the experimental values. If the polymer coating of the revolver fiber is removed, the Fresnel reflection at the outer surface of the support tube occurs and the back-reflected light wave is incident upon the silica capillaries and the hollow core. To clarify the in-phase condition, we estimated phase changes of optical routes in the uncoated revolver fiber. It was found that the reflected waves from the outer surfaces of the silica capillary and support tube are in phase at the core-capillary boundary, and they are mutually enhanced as a consequence of the constructive interference. As a result, the power in the hollow core and the silica capillary was improved for the uncoated revolver fiber compared with the polymer-coated one. The calculated velocity of fiber fuse propagation in the uncoated revolver fiber was in fair agreement with the experimental value.
| Published in | Journal of Electrical and Electronic Engineering (Volume 10, Issue 3) |
| DOI | 10.11648/j.jeee.20221003.11 |
| Page(s) | 71-79 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Fiber Fuse Phenomenon, Hollow-Core Photonic Crystal Fiber, Finite-Difference Technique
| [1] | Birks T. A., Roberts P. J., Russell P. St. J., Atkin D. M., and Shepherd T. J. (1995). Full 2-D photonic bandgaps in silica/air structures. Electron. Lett., 31 (22), 1941-1943. |
| [2] | Knight J. C., Birks T. A., Russell P. St. J., and Atkin D. M. (1996). All-silica single-mode optical fiber with photonic crystal cladding. Opt. Lett., 21 (19), 1547-1549. |
| [3] | Birks T. A., Knight J. C., and Russell P. St. J. (1997). Endlessly single-mode photonic crystal fiber. Opt. Lett., 22 (13), 961-963. |
| [4] | Knight J. C., Birks T. A., Russell P. St. J., and de Sandro J. P. (1998). Properties of photonic crystal fiber and the effective index model. J. Opt. Soc. Am. A, 15 (3), 748-752. |
| [5] | Knight J. C., Broeng J., Birks T. A., and Russell P. St. J. (1998). Photonic band gap guidance in optical fibers. Science, 282, 1476-1478. |
| [6] | Cregan R. F., Mangan B. J., Knight J. C., Birks T. A., Russell P. St. J., Roberts P. J., and Allan D. C. (1999). Single-mode photonic band gap guidance of light in air. Science, 285, 1537-1539. |
| [7] | Broeng J., Mogilevstev D., Barkou S. E., and Bjarklev A. (1999). Photonic crystal fibers: a new class of optical waveguides. Opt. Fiber Technol., 5, 305-330. |
| [8] | Russell P. St. J. (2003). Photonic crystal fibers. Science, 299, 358-362. |
| [9] | Knight J. C. (2003). Photonic crystal fibres. Nature, 424, 847-851. |
| [10] | Vienne G., Xu Y., Jackobsen C., Deyerl H., Jensen J. B., Sorensen T., Hansen T. P., Huang Y., Terrel M., Lee R. K., Mortensen N. A., Broeng J., Simonsen H., Bjarkey A., and Yariv A. (2004). Ultra-large bandwidth hollow-core guiding in all-silica Bragg fibers with nano-supports. Opt. Express, 12 (15), 3500-3508. |
| [11] | Roberts P. J., Couny F., Sabert H., Mangan B. J., Williams D. P., Farr L., Mason M. W., Tomlinson A., Birks T. A., Knight J. C., and Russell P. St. J. (2005). Ultimate low loss of hollow-core photonic crystal fibers. Opt. Express, 13 (1), 236-244. |
| [12] | Russell P. St. J. (2006). Photonic-crystal fibers. IEEE J. Lightwave Technol., 24 (12), 4729-4749. |
| [13] | Benabid F. (2006). Hollow-core photonic bandgap fibre: new light guidance for new science and technology. Philos. Trans. R. Soc. A, 364, 3439-3462. |
| [14] | Knight J. C. (2007). Photonic crystal fiber and fiber lasers. J. Opt. Soc. Am. B, 24 (8), 1661-1668. |
| [15] | Couny F., Benabid F., Roberts P. J., Light P. S., and Raymer M. G. (2007). Generation and photonic guidance of multi-octave optical-frequency combs. Science, 318, 1118-1121. |
| [16] | Debord B., Amrani F., Vincetti L., Gérôme F., and Benabid F. (2019). Hollow-core fiber technology: the rising of 'gas photonics'. Fibers, 7, 16-1-16-58. |
| [17] | Pryamikov A. D., Biriukov A. S., Kosolapov A. F., Plotnichenko V. G., Semjonov S. L., and Dianov E. M. (2011). Demonstration of a waveguide regime for a silica hollow-core microstructured optical fiber with a negative curvature of the core boundary in the spectral region > 3.5 μm. Opt. Express, 19 (2), 1441-1448. |
| [18] | Kosolapov A. F., Pryamikov A. D., Biriukov A. S., Shiryaev V. S., Astapovich M. S., Snopatin G. E., Plotnichenko V. G., Churbanov M. F., and Dianov E. M. (2011). Demonstration of CO2-laser power delivery through chalcogenide-glass fiber with negative-curvature hollow core. Opt. Express, 19 (25), 25723-25728. |
| [19] | Kolyadin A. N., Kosolapov A. F., Prymikov A. D., Biriukov A. S., Plotnichenko V. G., and Dianov E. M. (2013). Light transmission in negative curvature hollow core fiber in extremely high material loss region. Opt. Express, 21 (8), 9514-9519. |
| [20] | Yu F. and Knight J. C. (2013). Spectral attenuation limits of silica hollow core negative curvature fiber. Opt. Express, 21 (18), 21466-21471. |
| [21] | Yu F. and Knight J. C. (2016). Negative curvature hollow-core optical fiber. IEEE J. Selected Top. Quantum Electron., 22 (2), 4400610. |
| [22] | Wei C., Weiblen R. J., Menyuk C. R., and Hu J. (2017). Negative curvature fibers. Ad. Opt. Photon., 9 (3), 504-561. |
| [23] | Wang Y. and Ding W. (2017). Confinement loss in hollow-core negative curvature fiber: A multi-layered model. Opt. Express, 25 (26), 33122-33133. |
| [24] | Belardi W. and Knight J. C. (2014). Hollow antiresonant fibers with reduced attenuation. Opt. Lett., 30 (7), 1853-1856. |
| [25] | Poletti F. (2014). Nested antiresonant nodeless hollow core fiber. Opt. Express, 22 (20), 23807-23828. |
| [26] | Belardi W. (2015). Design and properties of hollow antiresonant fibers for the visible and near infrared spectral range. IEEE J. Lightwave Technol., 33 (21), 4497-4503. |
| [27] | Yu F., Xu M., and Knight J. C. (2016). Experimental study of low-loss single-mode performance in anti-resonant hollow-core fibers. Opt. Express, 24 (12), 12969-12975. |
| [28] | Kosolapov A. F., Alagashev G. K., Kolyadin A. N., Pryamikov A. D., Biryukov A. S., Bufetov I. A., and Dianov E. M. (2016). Hollow-core revolver fibre with a double-capillary reflective cladding. Quantum Electron., 46 (3), 267-270. |
| [29] | Bufetov I. A., Kosolapov A. F., Pryamikov A. D., Gladyshev A. V., Kolyadin A. N., Krylov A. A., Yatsenko Y. P., and Biriukov A. S. (2018). Revolver hollow core optical fibers. Fibers, 6, 39-1-39-26. |
| [30] | Sakr H., Chen Y., Jasion G. T., Bradley T. D., Hayes J. R., Mulvad H. C. H., Davidson I. A., Fokoua E. N., and Poletti F. (2020). Hollow core optical fibres with comparable attenuation to silica fibres between 600 and 1100 nm. Nat. Commun., 11, 6030. |
| [31] | Jasion G. T., Bradley T. D., Harrington K., Sakr H., Chen Y., Fokoua E. N., Davidson I. A., Taranta A., Hayes J. R., Richardson D. J., and Poletti F. (2020). Hollow core NANF with 0.28 dB/km attenuation in the C and L bands. Proc. Opt. Fiber Conf. (OFC 2020), Th4B.4. |
| [32] | Yu R., Chen Y., Shui L., and Xiao L. (2020). Hollow-core photonic crystal fibers gas sensing. Sensors, 20, 2996. |
| [33] | Nampoothiri A. V. V., Jones A. M., Fourcade-Dutin C., Mao C., Dadashzadeh N., Baumgart B., Wang Y. Y., Alharbi M., Bradley T., Campbell N., Benabid F., Washburn B. R., Corwin K. L., and Rudolph W. (2012). Hollow-core optical fiber gas lasers (HOFGLAS): a review. Opt. Mat. Express, 2 (7), 948-961. |
| [34] | Benoit A., Ilinova E., Beaudou B., Debord B., Gerôme F., and Benabid F. (2017). Spectral-temporal dynamics of high power Raman picosecond pulse using H2-filled kagome HC-PCF. Opt. Lett., 42 (19), 3896-3899. |
| [35] | Cao L., Gao S., Peng Z., Wang X., Wang Y., and Wang P. (2018). High peak power 2.8 μm Raman laser in a methane-filled negative-curvature fiber. Opt. Express, 26 (5), 5609-5615. |
| [36] | Li Z., Huang W., Cui Y., and Wang Z. (2018). Efficient mid-infrared cascade Raman source in methane-filled hollow-core fibers operating at 2.8 μm. Opt. Lett., 43 (19), 4671-4674. |
| [37] | Gladyshev A. V., Kosolapov A. F., Khudyakov M. M., Yatsenko Y. P., Kolyadin A. N., Krylov A. A., Pryamikov A. D., Biriukov A. S., Likhachev M. E., Bufetov I. A., and Dianov E. M. (2018). 2.9, 3.3, and 3.5 μm Raman lasers based on revolver hollow-core silica fiber filled by 1H2/D2 gas mixture. IEEE J. Selected Topics Quantum Electron., 24 (3), 0903008. |
| [38] | Astapovich M. S., Gladyshev A. V., Khudyakov M. M., Kosolapov A. F., Likhachev M. E., and Bufetov I. A. (2019). Watt-level nanosecond 4.42-μm Raman laser based on silica fiber. IEEE Photon. Technol. Lett., 31 (1), 78-81. |
| [39] | Wang Y., Dasa M. K., Adamu A. I., Antonio-Lopez J. E., Habib M. S., Amezcua-Correa R., Bang O., and Markos C. (2020). High pulse energy and quantum efficiency mid-infrared gas Raman fiber laser targeting CO2 absorption at 4.2 μm. Opt. Lett., 45 (7), 1938-1941. |
| [40] | Gladyshev A., Yatsenko Y., Kolyadin A., Kompanets V., and Bufetov I. (2020). Mid-infrared 10-μJ-level sub-picosecond pulse generation via stimulated Raman scattering in a gas-filled revolver fiber. Opt. Mat. Express, 10 (12), 3081-3089. |
| [41] | Beaudou B., Gerôme F., Wang Y. Y., Alharbi M., Bradley T. D., Humbert G., Auguste J.-L., Blondy J.-M., and Benabid F. (2012). Millijoule laser pulse delivery for spark ignition through kagome hollow-core fiber. Opt. Lett., 37 (9), 1430-1432. |
| [42] | Jaworski P., Yu F., Maier R. R. J., Wadsworth W. J., Knight J. C., Shephard J. D., and Hand D. P. J. (2013). Picosecond and nanosecond pulse delivery through a hollow-core negative curvature fiber for micro-machining applications. Opt. Express, 21 (19), 22742-22753. |
| [43] | Ulrich A., Maier R. R. J., Yu F., Knight J. C., Hand D. P. J., and Shephard J. D. (2013). Flexible delivery of Er:YAG radiation at 2.94 μm with negative curvature silica glass fibers: a new solution for minimally invasive surgical procedures. Biomedical Opt. Express, 4 (2), 193-205. |
| [44] | Dumitrache C., Rath J., and Yalin A. P. (2014). High power spark delivery system using hollow core kagome lattice fibers. Materials, 7, 5700-5710. |
| [45] | Michieletto M., Lyngso J. K., Jakobsen C., Laegsgaard J., Bang O., and Alkeskjold T. T. (2016). Hollow-core fibers for high power pulse delivery. Opt. Express, 24 (7), 7103-7119. |
| [46] | Elizer S. and Wedel B. (2018). Hollow core optical fibers for industrial ultra short pulse laser beam delivery applications. Fibers, 6, 80-1-80-11. |
| [47] | Zhu X., Wu D., Wang Y., Yu F., Li Q., Qi Y., Knight J., Chen S., and Hu L. (2021). Delivery of CW laser power up to 300 Watts at 1080 nm by an uncooled low-loss ant-resonant hollow-core fiber. Opt. Express, 29 (2), 1492-1501. |
| [48] | Kashyap R. and Blow K. J. (1988). Observation of catastrophic self-propelled self-focusing in optical fibres. Electron. Lett., 24 (1), 47-49. |
| [49] | Hand D. P. and Russell P. St. J. (1988). Solitary thermal shock waves and optical damage in optical fibers: the fiber fuse. Opt. Lett., 13 (9), 767-769. |
| [50] | Kolyadin A. N., Kosolapov A. F., and Bufetov I. A. (2018). Optical discharge propagation along hollow-core optical fibres. Quantum Electron., 48 (12), 1138-1142. |
| [51] | Bufetov I. A., Kolyadin A. N., Kosolapov A. F., Efremov V. P., and Fortov V. E. (2019). Catastrophic damage in hollow core optical fibers under high power laser radiation. Opt. Express, 27 (13), 18296-18311. |
| [52] | Shuto Y. (2015). Simulation of fiber fuse phenomenon in single-mode optical fibers. In Advances in Optical Fiber Technology, Eds. Yasin M., Arof H., and Harun S. W. Chap. 5, InTech, Rijeka. |
| [53] | Sticker J. and Parker J. G. (1982). Experimental investigation of electrical breakdown in nitrogen and oxygen induced by focused laser radiation at 1.064 μ. J. Appl. Phys., 53 (2), 851-855. |
| [54] | Davis D. D., Mettler S. C., and DiGiovani D. J. (1996). A comparative evaluation of fiber fuse models. Proc. Soc. Photo-Opt. Instrum. Eng., 2966, 592-606. |
| [55] | Jensen B. (1985). The quantum extension of the Drude-Zener theory in polar semiconductors. In Handbook of Optical Constants of Solids, Ed. Palik E. D., Chap. 9. Academic Press Inc., New York. |
| [56] | Ordal M. A., Long L. L., Bell R. J., Bell S. E., Bell R. R., Alexander, Jr. R. W., and Ward C. A. (1983). Optical properties of metals Al, Co, Cu, Au, Fe, Pb, Ni, Pd, Pt, Ag, Ti, and W in the infrared and far infrared. Appl. Opt., 22 (7), 1099-1119. |
| [57] | Shuto Y. (2016). End face damage and fiber fuse phenomena in single-mode fiber-optic connectors. J. Photonics, 2016, 2781392. |
| [58] | Shoji M. (1995). Heat Transfer Textbook, Appendix F, University of Tokyo Press, Tokyo. |
| [59] | Sakai J. and Suzuki Y. (2011). Equivalence between in-phase and antiresonant reflection conditions in Bragg fiber and its application to antiresonant reflecting optical waveguide-type fibers. J. Opt. Soc. Am. B, 28 (1), 183-192. |
| [60] | Argyros A. (2002). Guided modes and loss in Bragg fibres. Opt. Express, 10 (24), 1411-1417. |
| [61] | Deng A., Hasan M. I., Wang Y., and Chang W. (2020). Analyzing mode index mismatch and field overlap for light guidance in negative-curvature fibres. Opt. Express, 28 (19), 27974-27988. |
| [62] | Shibata N. and Edahiro T. (1982). Refractive-index dispersion for GeO2-, P2O5- and B2O3-doped silica glasses in optical fibers. Trans. IECE Jpn., E65 (3), 166-172. |
| [63] | Atkins R. M., Simpkins P. G., and Yabon A. D. (2003). Track of a fiber fuse: a Rayleigh instability in optical waveguides. Opt. Lett., 28 (12), 974-976. |
| [64] | Todoroki S. (2014). Fiber Fuse: Light-Induced Continuous Breakdown of Silica Glass Optical Fiber, Chap. 3, NIMS Monographs, Springer, Tokyo. |
| [65] | Shoji M. (1995). Heat Transfer Textbook, Chap. 4, University of Tokyo Press, Tokyo. |
APA Style
Yoshito Shuto. (2022). Fiber Fuse Simulation in Hollow-Core Photonic Crystal Fibers. Journal of Electrical and Electronic Engineering, 10(3), 71-79. https://doi.org/10.11648/j.jeee.20221003.11
ACS Style
Yoshito Shuto. Fiber Fuse Simulation in Hollow-Core Photonic Crystal Fibers. J. Electr. Electron. Eng. 2022, 10(3), 71-79. doi: 10.11648/j.jeee.20221003.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.jeee.20221003.11,
author = {Yoshito Shuto},
title = {Fiber Fuse Simulation in Hollow-Core Photonic Crystal Fibers},
journal = {Journal of Electrical and Electronic Engineering},
volume = {10},
number = {3},
pages = {71-79},
doi = {10.11648/j.jeee.20221003.11},
url = {https://doi.org/10.11648/j.jeee.20221003.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20221003.11},
abstract = {Recently great interest has been aroused by the development of photonic crystal fibers (PCFs). Hollow-core photonic crystal fibers (HC-PCFs) can guide light inside the hollow core by photonic bandgap or inhibited-coupling mechanisms. HC-PCFs exhibit low propagation losses at 1.064 μm and the 1.51-1.60 μm range. The HC-PCFs are now implemented as an important tool of laser beam delivery in place of traditional single mode optical fibers. One of the problems arising from high-power injection in the optical fiber is the probability of triggering the fiber fuse effect. This effect is related to a heat conduction process in optical fibers. The unsteady-state thermal conduction process in several HC-PCFs (revolver fibers) for high-power transmission was studied theoretically by the explicit finite-difference method using the thermochemical SiOx production model. For heat conduction analysis, the complicated inner structure of revolver fiber was simplified using the model composed of silica-ring and air-hole layers. The calculated velocities of fiber fuse propagation in two types of polymer-coated revolver fibers were in fair agreement with the experimental values. If the polymer coating of the revolver fiber is removed, the Fresnel reflection at the outer surface of the support tube occurs and the back-reflected light wave is incident upon the silica capillaries and the hollow core. To clarify the in-phase condition, we estimated phase changes of optical routes in the uncoated revolver fiber. It was found that the reflected waves from the outer surfaces of the silica capillary and support tube are in phase at the core-capillary boundary, and they are mutually enhanced as a consequence of the constructive interference. As a result, the power in the hollow core and the silica capillary was improved for the uncoated revolver fiber compared with the polymer-coated one. The calculated velocity of fiber fuse propagation in the uncoated revolver fiber was in fair agreement with the experimental value.},
year = {2022}
}
TY - JOUR T1 - Fiber Fuse Simulation in Hollow-Core Photonic Crystal Fibers AU - Yoshito Shuto Y1 - 2022/05/26 PY - 2022 N1 - https://doi.org/10.11648/j.jeee.20221003.11 DO - 10.11648/j.jeee.20221003.11 T2 - Journal of Electrical and Electronic Engineering JF - Journal of Electrical and Electronic Engineering JO - Journal of Electrical and Electronic Engineering SP - 71 EP - 79 PB - Science Publishing Group SN - 2329-1605 UR - https://doi.org/10.11648/j.jeee.20221003.11 AB - Recently great interest has been aroused by the development of photonic crystal fibers (PCFs). Hollow-core photonic crystal fibers (HC-PCFs) can guide light inside the hollow core by photonic bandgap or inhibited-coupling mechanisms. HC-PCFs exhibit low propagation losses at 1.064 μm and the 1.51-1.60 μm range. The HC-PCFs are now implemented as an important tool of laser beam delivery in place of traditional single mode optical fibers. One of the problems arising from high-power injection in the optical fiber is the probability of triggering the fiber fuse effect. This effect is related to a heat conduction process in optical fibers. The unsteady-state thermal conduction process in several HC-PCFs (revolver fibers) for high-power transmission was studied theoretically by the explicit finite-difference method using the thermochemical SiOx production model. For heat conduction analysis, the complicated inner structure of revolver fiber was simplified using the model composed of silica-ring and air-hole layers. The calculated velocities of fiber fuse propagation in two types of polymer-coated revolver fibers were in fair agreement with the experimental values. If the polymer coating of the revolver fiber is removed, the Fresnel reflection at the outer surface of the support tube occurs and the back-reflected light wave is incident upon the silica capillaries and the hollow core. To clarify the in-phase condition, we estimated phase changes of optical routes in the uncoated revolver fiber. It was found that the reflected waves from the outer surfaces of the silica capillary and support tube are in phase at the core-capillary boundary, and they are mutually enhanced as a consequence of the constructive interference. As a result, the power in the hollow core and the silica capillary was improved for the uncoated revolver fiber compared with the polymer-coated one. The calculated velocity of fiber fuse propagation in the uncoated revolver fiber was in fair agreement with the experimental value. VL - 10 IS - 3 ER -
Email: